How To Clean A Shower Head With Bleach?

Is the water pressure in your showerhead is almost negligible? Or is it shooting water everywhere? Don’t worry; the head might be clogged with minerals, and a simple solution is to clean it.

Here, we will use chlorine to clean the showerhead. Chlorine is one of the best disinfectants that can efficiently deal with fungi, viruses, and bacteria. It instantly cleans the lead without any hassles. However, we suggest that you read all the given instructions to avoid any trouble.


  • Diluted household bleach – 1 cup
  • Water – 2 cups
  • Empty spray bottle
  • A small funnel
  • Bowl


Mix one cup of household bleach with two cups of water and mix them properly. You can do the mixing in a bowl.

Transfer the mixture into a spray bottle with the help of a funnel.

Please remove the showerhead and take it outdoors. You can go to your yard or garden.

Spray the solution of water and bleach on the head and leave it intact for around 30 minutes. Make sure the mixture covers both internal and external parts of your showerhead.

Use a stiff bristle toilet brush to rub clean the head. Afterward, wash it with clean water.

You can follow the steps mentioned above once or twice every month. Clean the showerhead whenever it looks filthy. Increase the frequency if you receive a hard water supply.

How To Clean A Shower Head Using Vinegar?

Clean A Shower Head Using Vinegar

You can also clean a showerhead using white vinegar. For this process, you need some white vinegar, washing liquid, and a bucket. Create a mixture of warm water, white vinegar, and washing-up liquid. Leave the head submerged in this solution for an entire night.

Disassemble the head and put all its parts into the cleaning solution for better results. Scrub the showerhead or all its components to get sparkling effects. Use citric acid instead of white vinegar if your showerhead is accumulated with limescale. You can also use a limescale remover.

Don’t worry if you cannot take out the showerhead. You can clean it without disassembly. For this procedure, you need an old towel and white vinegar. Drench the old towel or paper towel into white vinegar and wrap it all around the fixture. Leave the towel wrapped for around 20 minutes to get a shining showerhead.

Why Clean A Showerhead?

Mineral contents from the water flow deposit in the showerhead’s holes and cause uneven sprays. Also, the mineral accumulation can clog the water outlets, resulting in a low water pressure, which is painful and irritating.

Another reason, which we forget most of the time, is that your shower head can be a breeding place for a lot of bacteria, viruses, and other germs. According to a study, around one-third of all the active showerheads are perfect growing ground for bacteria. The moist and warm environment of a showerhead generates slime, which promotes germ growth.

Final Thoughts

Most of the users forget to clean the showerhead while doing the house cleaning. But, washing this bathroom fixture is crucial. Otherwise, you might have to deal with low water pressure and leaks.

Plus, a clean bathing head means you can enjoy a fresh and hygienic bath. If you have any suggestions or queries, let us know in the comments section.

Similar Posts